We've founds that these distances provide the best groups for combat effective accuracy at different distances out to 300yds+ before needing to 'hold over' or combat effective hits. At that point adjust your elevation for a 100 or 200yd zero and print groups from 25yds to 300yds to know your drop. Pinch screw torque 25in - 50in lbs (Due to varying spec of AK barrels)įor RD builds we will traditionally do a rough zero at 25yds with the rear sight set at the 100 mark.1/8th allen wrench needed for gas set screw.9/64 allen wrench needed for clamping screws (Not included - We highly recommend using a tool such as Wheeler inch torque wrench and the use of thread locker to prevent the screws from backing out under fire).Gunsmith installation is not required, but highly recommended.Drum and post included already installed.The sight comes in a black oxide finish.all on foot, barefoot in fact, and each carried an AK-47 in his arms. Acceptable journal range for gas block is. Nobody had been hurt and the mob of Mugabe's henchmen had retreated out of sight. 597 and clamps in place in the existing gas block location. For all Serbian/Yugoslavian, Chinese, Vepr, or other larger size barrels it will require a professional gunsmith for installation.*** ***Our gas blocks will work with most AKM/AK74 patterned rifles with the acceptable journal range listed above. *Includes AK sight tool, but most sight tools will work with our block. The drum adjusts windage left and right, and the post screws up and down for elevation. The front sight mechanically adjusts the same as a traditional/standard AK front sight. The Tunable FS/GB (front sight/gas block) features an adjustment screw on the front face of the block to either open or close off gas. An extended handguard is the simplest way to make your build aesthetically pleasing, otherwise we would recommend purchasing the Rifle Dynamics Extended Tunable Front Sight/Gas Block that will cover the holes altogether, but will add 0.7 oz to the front end. Please note, this gas block will not cover the existing gas block pin holes on your barrel.

Ak 47 sight distance